Markham Makerspace - Dashboard

Staff Activity Timeline

Shows hourly staff transactions (booking starts and ends requiring setup, teardown, checkout, or checkin)

0

8AM

4

9AM

0

10AM

0

11AM

2

12PM

1

1PM

1

2PM

2

3PM

2

4PM

2

5PM

6

6PM

0

7PM

0

8PM

0

9PM

Show:

Opening Shift

5 workstation bookings

9 AM 4 tasks

▼

Prusa Core One #4 "Striker Eureka"

9:30 AM - 12:30 PM • S.P.

CONFIRMED

▼

Prusa Core One #4 "Striker Eureka"

3D Printers

CONFIRMED

Time: 9:30 AM - 12:30 PM

Patron: S.P. (s***@yorku.ca)

Duration: 3.0 hours

FDM 3D Print Job 0 / 8

1 Confirm patron has completed FDM orientation training
2 Receive file from patron; load into slicer software
3 Slice file; check for errors, supports, and infill; review and agree settings with patron
4 Provide estimated print duration and material cost to patron
5 Update booking duration in LibCal to match slicer estimate
6 Set up printer: load filament, clean and level bed. For multicolour (AMS): load all required colours
7 Send sliced file to printer; start print job
8 Monitor print in progress
Phase 2: Live countdown timer

ID: b333ae82505f

Prusa Core One #3 "Cherno Alpha"

9:30 AM - 6:30 PM • I.G.

CONFIRMED

▼

Prusa Core One #3 "Cherno Alpha"

3D Printers

CONFIRMED Shift Boundary

Time: 9:30 AM - 6:30 PM

Patron: I.G. (i***@yorku.ca)

Duration: 9.0 hours

FDM 3D Print Job 0 / 8

1 Confirm patron has completed FDM orientation training
2 Receive file from patron; load into slicer software
3 Slice file; check for errors, supports, and infill; review and agree settings with patron
4 Provide estimated print duration and material cost to patron
5 Update booking duration in LibCal to match slicer estimate
6 Set up printer: load filament, clean and level bed. For multicolour (AMS): load all required colours
7 Send sliced file to printer; start print job
8 Monitor print in progress
Phase 2: Live countdown timer

ID: 19ec93fd2df4

Prusa Core One #2 "Crimson Typhoon"

9:30 AM - 6:30 PM • I.G.

CONFIRMED

▼

Prusa Core One #2 "Crimson Typhoon"

3D Printers

CONFIRMED Shift Boundary

Time: 9:30 AM - 6:30 PM

Patron: I.G. (i***@yorku.ca)

Duration: 9.0 hours

FDM 3D Print Job 0 / 8

1 Confirm patron has completed FDM orientation training
2 Receive file from patron; load into slicer software
3 Slice file; check for errors, supports, and infill; review and agree settings with patron
4 Provide estimated print duration and material cost to patron
5 Update booking duration in LibCal to match slicer estimate
6 Set up printer: load filament, clean and level bed. For multicolour (AMS): load all required colours
7 Send sliced file to printer; start print job
8 Monitor print in progress
Phase 2: Live countdown timer

ID: 19ec93fd2df4

Prusa XL #2 "Orochi"

9:30 AM - 6:30 PM • S.P.

CONFIRMED

▼

Prusa XL #2 "Orochi"

3D Printers

CONFIRMED Shift Boundary

Time: 9:30 AM - 6:30 PM

Patron: S.P. (s***@yorku.ca)

Duration: 9.0 hours

FDM 3D Print Job 0 / 8

1 Confirm patron has completed FDM orientation training
2 Receive file from patron; load into slicer software
3 Slice file; check for errors, supports, and infill; review and agree settings with patron
4 Provide estimated print duration and material cost to patron
5 Update booking duration in LibCal to match slicer estimate
6 Set up printer: load filament, clean and level bed. For multicolour (AMS): load all required colours
7 Send sliced file to printer; start print job
8 Monitor print in progress
Phase 2: Live countdown timer

ID: ace150894dce

12 PM 1 task

▼

Prusa Core One #1 "Gipsy Danger"

12:30 PM - 6:30 PM • Y.C.

CONFIRMED

▼

Prusa Core One #1 "Gipsy Danger"

3D Printers

CONFIRMED Shift Boundary

Time: 12:30 PM - 6:30 PM

Patron: Y.C. (y***@my.yorku.ca)

Duration: 6.0 hours

FDM 3D Print Job 0 / 8

1 Confirm patron has completed FDM orientation training
2 Receive file from patron; load into slicer software
3 Slice file; check for errors, supports, and infill; review and agree settings with patron
4 Provide estimated print duration and material cost to patron
5 Update booking duration in LibCal to match slicer estimate
6 Set up printer: load filament, clean and level bed. For multicolour (AMS): load all required colours
7 Send sliced file to printer; start print job
8 Monitor print in progress
Phase 2: Live countdown timer

ID: 4dffd63e0469

Closing Shift

4 workstation bookings

1 PM 1 task

▼

Prusa Core One #4 "Striker Eureka"

1:30 PM - 2:30 PM • R.G.

CONFIRMED

▼

Prusa Core One #4 "Striker Eureka"

3D Printers

CONFIRMED

Time: 1:30 PM - 2:30 PM

Patron: R.G. (r***@my.yorku.ca)

Duration: 1.0 hours

FDM 3D Print Job 0 / 8

1 Confirm patron has completed FDM orientation training
2 Receive file from patron; load into slicer software
3 Slice file; check for errors, supports, and infill; review and agree settings with patron
4 Provide estimated print duration and material cost to patron
5 Update booking duration in LibCal to match slicer estimate
6 Set up printer: load filament, clean and level bed. For multicolour (AMS): load all required colours
7 Send sliced file to printer; start print job
8 Monitor print in progress
Phase 2: Live countdown timer

ID: 53fe828d048b

3 PM 1 task

▼

Prusa Core One #4 "Striker Eureka"

3:00 PM - 4:00 PM • R.G.

CONFIRMED

▼

Prusa Core One #4 "Striker Eureka"

3D Printers

CONFIRMED

Time: 3:00 PM - 4:00 PM

Patron: R.G. (r***@my.yorku.ca)

Duration: 1.0 hours

FDM 3D Print Job 0 / 8

1 Confirm patron has completed FDM orientation training
2 Receive file from patron; load into slicer software
3 Slice file; check for errors, supports, and infill; review and agree settings with patron
4 Provide estimated print duration and material cost to patron
5 Update booking duration in LibCal to match slicer estimate
6 Set up printer: load filament, clean and level bed. For multicolour (AMS): load all required colours
7 Send sliced file to printer; start print job
8 Monitor print in progress
Phase 2: Live countdown timer

ID: 53fe828d048b

4 PM 1 task

▼

Bernette 35 #01 "Giorgio"

4:00 PM - 6:00 PM • Y.T.

CONFIRMED

▼

Bernette 35 #01 "Giorgio"

Sewing, Textiles and Vinyl

CONFIRMED

Time: 4:00 PM - 6:00 PM

Patron: Y.T. (y***@my.yorku.ca)

Duration: 2.0 hours

Sewing Machine Session 0 / 3

1 Confirm patron has completed sewing machine orientation
2 Verify machine is threaded and ready for use
3 Provide brief usage reminder and safety guidelines

ID: 8972c670d627

5 PM 1 task

▼

Bernette 35 #03 "Vera"

5:30 PM - 6:30 PM • I.G.

CONFIRMED

▼

Bernette 35 #03 "Vera"

Sewing, Textiles and Vinyl

CONFIRMED

Time: 5:30 PM - 6:30 PM

Patron: I.G. (i***@yorku.ca)

Duration: 1.0 hours

Sewing Machine Session 0 / 3

1 Confirm patron has completed sewing machine orientation
2 Verify machine is threaded and ready for use
3 Provide brief usage reminder and safety guidelines

ID: d8ce32485a72

In-Progress Jobs

1

Prusa Core One L #1 "Pillar of Autumn"

3D Printers

IN PROGRESS

Started: Tuesday, October 27, 2026 at 3:30 PM

Due: Wednesday, October 28, 2026 at 5:30 PM

Patron: A.M. (a***@my.yorku.ca)

In progress: 8.4 hours

Job Setup 0 / 8

1 Confirm patron has completed FDM orientation training
2 Receive file from patron; load into slicer software
3 Slice file; check for errors, supports, and infill; review and agree settings with patron
4 Provide estimated print duration and material cost to patron
5 Update booking duration in LibCal to match slicer estimate
6 Set up printer: load filament, clean and level bed. For multicolour (AMS): load all required colours
7 Send sliced file to printer; start print job
8 Monitor print in progress
Phase 2: Live countdown timer

ID: a8e4e051bcc5

Completed Today

0

No completed bookings today